Rick Bandy
Dec 30th, 02, 9:09 AM
We are doing the bodywork on my 66 and we are getting what I call 'oil canning action".
In the center of the trunk lid you can push down and the metal will push in and then it pops back up when you let go. Is there a coating that can be poured or sprayed into the lid to help cure this problem? I have seen where the factory used something similar inside the doors.
In the center of the trunk lid you can push down and the metal will push in and then it pops back up when you let go. Is there a coating that can be poured or sprayed into the lid to help cure this problem? I have seen where the factory used something similar inside the doors.