Ive got Power Windows and Power locks on my car but someone cut the wires off at the joint between the door and the body.
Where can I get these wiring harnesses cause I have all of it inside the doors but none inside the body. Could I go ahead and just run the wires myself and have a wiring going to a 12v source? Also where can I get the boot that goes between the door and body?


Thanks

If you are not worried about originality, I would make my own wiring harness and find a boot from the junkyard that I liked and would work. I have made most of my own wiring harnesses on my Malibu. They are safer and better grade wiring than factory.

What would I need to do to make the wiring for them? All I have are every plug for the PW but nothing for the PL. Im guessing I just could use two female spade connectors for the plug on the PL but what would I do for a button?

Contact M & H Electrical Fabricators.
they have a website and their Ph # is 562-926-9552

Nate

My 69 SS396 has p/w, p/l also. The old boots were cracked and had paint overspray on them. I got good quality new boots from O.P.G. I think they were $21.00 each. The power locks are vaccum activated but don't ask me how to rig those up. I marked all the vac. lines when I took the car apart for paint.

To add to my previous post, I thought yours was a 69 for some reason. I don't know if the power locks are vacumm activated on a 70.

no it has electric solenoids.