I found two built sheets in my 1966 chevelle Malibu Conv. One was in the back seat springs and one was in the front bucket seat springs . The one in the back seat was for my car (Dale helped me with them) If someone has the car that goes to the one i found in the front seat they can have it and it is just like new .Now i think it goes to a 66 conv. with bucket seats The best way to tell if it goes to your car is,look at your cowl tag and see what the second set of top numbers are The ones after the date on top it should be three number and the first two are 66(Is just a coincidence that it start with 66 mine start with 74) and if you have the right third number I will sent you the built sheet . This number is the job number . I want the owner to have this if the car is out there

Thought that below the date on the cowl tag you had the 66-13867 or 66-13667, etc for the 66 convertible or I am I reading your post incorrectly?

It is not below it it is to the right hand side of it
Like 028 741
66 13667 BAL.36452
Ware the 741 is above it should be 66 and you give me last number and it is yours

what assembly plant are we talking about?

Bal

I would post a picture of it if i new how I can e-mail to someone and they can post it I really though that someone would want this

here you go
http://www.chevelles.com/showroom/data/500/medium/buildsheet.jpg

ttt