i love chevelles and when i found this site i had to join

just wondering what exhaust you guys were running on your chevelles??

i currently have stock manifolds, 2.5" BBK x-pipe center section running to 2.5" MAC Flowpath mufflers, and 3" flowmaster tailpipes,,just curious about everyone else

I have a set of dynomax headers, they are only about 4 years old and the ceramic coating is rusting and pitting so I am going to swap them out at some point. Behind those I have a stock set of duals, 2 1/4 inch no cross over pipes, and flow master 50s series mufflers.

nothing special.

BTW... welcome to the site.

A big welcome to yet another '69 owner! My system is all stock from the manifolds to the tips. I like that"tinny" noise that the stock system makes at idle-takes me back a bit in time.

Welcome! Three inch mandrel flowmaster system with H-pipe.

read below with stock manifolds & a 2.5 flowmaster "american thunder" system

1972-Flowtech Afterburners with Pro-Flow mufflers, a crossover and 2.5" with downturn tips hiding under rear valence

Welcome!!!! Any pics of your car???? I'm partial to Orange 69's:D
Hedman headers 2" and hopefully Torque Tech 3" to the bumper. Flowmasters for mufflers.

Stock Factory chambered exhaust..aint nuttin like it !..Welcome!.

ALbert

Welcome!!!! Any pics of your car???? I'm partial to Orange 69's:D
Hedman headers 2" and hopefully Torque Tech 3" to the bumper. Flowmasters for mufflers.

here ya go,,its an alright pic,,this pic is old,,if you notice the tailpipes come out behind the back tires,,now they come straight out the back, its looks kinda red,,but its really hugger orange

http://img335.imageshack.us/img335/5042/chevelle6if3dw.jpg (http://imageshack.us)

Nice!!!!:thumbsup:

Hooker Super Competiton Ceramic Coated Headers with 2.5'' Flowmaster
American Thunder exhaust kit with Flowmaster 50 series Delta Flow mufflers.

Love your Chevelle by the way.

thanks Mike and Chris,,thats been my favorite chevelle / or musclecar since i can remember, i wanna build a 70 SS black w/ hugger orange stripes

Welcome...Nice Ride!!! I'm running Hooker Super Competiton Ceramic Coated Headers with 3.0" electric cut-out collectors and 2.5'' pipes 40 series Flowmaster mufflers, on my 350. The cut-outs come in handy when "Mr. Bass" is beside you at the stoplight. Apparently he likes to make his car vibrate. I'm just helping him out, right?

Summit house brand headers, and Jegs 2.5 mandrel bent exhaust. with a 454. Jim

I'm running a Gardner Chambered system with the original Chambered Mufflers attached to the Gardner pipes. Fits like a glove.

Nice 69, for sure. I like the older photos.

Chris

- Hooker Comp Ceramic Coated Headers.
- H-Pipe.
- 3" Stainless Tubing front to back.
- Dynomax Super Turbo Mufflers.
- Stock GM factory chrome tips.

The Sound (http://www.angelfire.com/folk/canam/idlerev.wav)

Very nice looking 69 you have there. Welcome aboard :waving:

Welcome to another 69 guy :waving:

1.875 Hooker Super Comps
3" pipes through Flow Masters
3" Tails dumping nicely behind the rear wheels

Has a sound like "If ya touch me, I'll Eat a"

Garry :D

Welcome to the site, your car sounds like my kind of car ;) .. I'm in the process of installing a Summit brand 3" header back system with stainless mufflers as we speak.. That's behind my existing Hooker super comp headers..

PS, we need pics of your car :thumbsup:

Scott

Welcome to the site, your car sounds like my kind of car ;) .. I'm in the process of installing a Summit brand 3" header back system with stainless mufflers as we speak.. That's behind my existing Hooker super comp headers..

PS, we need pics of your car :thumbsup:

Scott
if its nice this weekend,,i'll get some good pics to post