I replaced my original fenders with some el camino fenders that do not have the malibu trim that was on the old fenders. I have also long since sold my old fenders, and i forgot to mark the location of the malibu emblems. Does anyone have a template that marks the 4 holes (i believe) that i need to drill for the malibu trim.

Also the trim on the bottom of the fender that goes along the body.


tHANKS!!!

gUm... --> Reference the assy manual. I have made SS templates for the 70-72 Chevelle fenders but do not have a Malibu template for 70-72s nor any other years. I'm sure someone here at TC has a template(s). There have been requests made regarding your post (and other posts) over the years, although there is no single point of reference for the templates that I know of. The assy manual is really about your only source for the measurements.

Never thought to look in that i will check it out tonight.

Hey Gumball - if you get to the point of really needing it, let me know and I'll measure. I'm just about to fill those holes on mine, but I'll measure and give you what you need if you wind up in a bind...

-curt