I was hoping to put some ralley wheels on a 64 chevelle. I wanted to go with 15x7's in the front and 15x8's in the back. I have 2 inch drop spindles in the front but the rear is the stock 10 bolt. Does anyone know if this will fit? Thanks for any help

blue,
i'm going to install 15x8 on the back of my 64 elky, with the orig 10 bolt. Key is get the 4.5" backspacing or maybe even the 5" backspacing. Even so, my 275-60-15's will be tight and I'll prob have to persuade the inner quarter a little... Also, I remember that the stock shock bracket was a little tight - may have to grind that area down a little... 15x7 front should be ok, but with your drop may be a little tighter than on a stock front end. good luck!

Thanks patrick, I found a 15x8 and tried to fit it in today and it was just a hair to big with a 4.5 inch backspacing. I am going to get the 15x8 with the 5.5 inch backspacing and it should be good. My fenders were already rolled and it still didn't quite fit.