I just purchased a crank scraper, oil pan baffle, windage tray package from Summit, and am wondering the proper way to install this set-up on a big block chevy, if anyone has done this procedure. If so, I would greatly appreciate any helpful info provided. Also, if anyone has used this or a similar setup, was it worth it? Thank you.

I've never bought one of those, but I'm surprised it didn't come with any instructions. Maybe Summit or the vendor that made the kit has some?

Nope, I looked all through the shipping box, and have searched all over the internet. I found that the Moroso site has instructions for the scraper, but they quit making windage trays so they don't have any instructions for those. I still can't believe that they sold/sent a set-up like this w/ no instructions. It's probably a pretty straightforward installation, but it's something I don't exactly want to screw up.

I hear ya. I don't recall exactly where I ran across it, but I think if you do a search on this site for windage trays or scrapers you will find out what you need to know. I know that I've seen recommendations for scraper clearances to the crank and rods and whatnot, but I don't remember what they are off-hand.

Call the Mfg. tech line.
John