I can't believe it! I was putting the 3rd coat of K-38 on the door pillar and forgot to adjust the air cap from horizontal to vertical spray graemlins/angry.gif Needless to say it ran about 3-4 inches before it stopped. I was too stunned to chase it with a air stream. I really want to wet sand and shoot color tomorrow. Am I waisting my time to try to wet block it out smooth after it has dried a good 10+hours? It was the 3rd coat. Thanks for any tips :(

Spray a guide coat on and block it out,I prefer to use sealer, and shoot.

Just guide coat the thing and sand smooth, you will never see it.

If you ever see the stuff I prime at work you could pick out a run or two smile.gif Darn gun anyway :rolleyes: