|
: What to use for seam sealer? Martinsr ? 67johnny May 28th, 02, 2:58 AM I have my 71 stipped bare and two-parted and now need to seal all the seams! There are a lot of choices but I want to use the best! Also,what is the best product to use for the roof seams? Thanks! mr409 May 28th, 02, 8:00 AM I don't know about it being the best but I use 3-M's fast-n-firm in the tube. It cost about $9 dollars and uses a caulking gun. This "seems" (pun intended) to be what they used in the rain gutters. It looks the same to me. ------------------ Bob (Pa.) 1963 Impala 283 1966 Chevelle SS 409 1969 Malibu 307 1972 Malibu 307 1969 C10 stepside 350 1971 Cheyenne 20 3/4 ton Somebody stop me... :) Looking for Chevelle or Impala parts? Click here: Chevelle parts for sale (http://www.angelfire.com/trek/mr409/items4sale.html) The 348/409 Chevrolet forum http://www.network54.com/Hide/Forum/187005 robert defalco May 28th, 02, 9:15 AM use a urethane seam sealer they dry to a rubbery consistancy come in a few colors and can be painted over with ease and they dont dry out and crack and they flow well if you use an acid brush with a little thinner on it you could smooth it out nicely thats what i used and there awesome MARTINSR May 28th, 02, 9:43 PM I am with Robert on this one. 3M Ultrapro part number 08360(white) or 08361 (gray) is one of the best going. The Fast'n Firm is not a bad product and it would be my choice if the urethane wasn't being used. ------------------ 1965 Buick Gran Sport Convertible 1965 Buick Skylark H/T "Fan of most anything that moves human beings" 67johnny May 30th, 02, 2:30 AM Thanks all! ,good info as always. | ||