Car has been apart for quite some time but I am finally able to do some assembly and mockup prior it going out for paint. I am having a problem determining which parts are required for the steering column assembly (from the interior side only). I have the brake pedal assembly installed and it appears it is installed first. Next I have my steering column and it slides into the splined steering shaft on the engine compartment side fine. Now it is a matter of bolting the steering column up.

This is where I have questions. The bolt holes on the steering column brackets are slotted and it appears they are placed on the two bolts hanging down from underneath the dash. I installed the two flared nuts to bolt the column to those two bolts/studs, however, it does not look like the assembly is complete. Am I missing a part(s) here. Can anyone provide any input or pictures? It wouldl be greatly appreciated.

Thanks in advance,
-jeff

I dont know if this will help you out read this thread (http://www.chevelles.com/forums/showthread.php?t=127599)

Thanks for the pics! I was missing the two rectangle slotted shims! I found the shims and everything bolts up perfectly! Thanks for the pics!

I would certainly be interested in seeing addtional pictures of you are willing to forward them or able to post them on the web. Always nice to see them come back to life :)