|
: Roller rockers with solid cam? Garont May 6th, 06, 7:45 AM Does anyone have any experience running full roller rocker arms with a solid lifter cam? Using a 369/375hp solid cam and have a set of 1.7 ratio Crane Gold roller rockers. T bulb122 May 6th, 06, 8:12 AM I've got 1.6 Crane Gold on my SB with a solid cam. No problems so far.... :) Johnny O May 6th, 06, 9:07 AM Ran that combo on mine for 5 years without a hitch. Just curious, have you heard that there could be a problem? There are a lot of rumors floating around out there. Mr Chevelle May 6th, 06, 10:10 AM :) Solid lifter 454 for 6 years with Harland Sharp roller rockers, no problems. 427L88 May 6th, 06, 10:22 AM I prefer them for solid cams. MrBill66Malibu May 6th, 06, 2:19 PM Soild roller cam in my 350 (now growing to 383) w/ Harland Sharpe roller rockers for 5 yrs, lots of abuse, no problems ! Garont May 6th, 06, 3:33 PM Thanks Guy's. Just wanted some feedback from people with experience. Next question: Will the 1.7 ratio roller rocker fit under a stock height BBC cover? Johnny, The rumors probably stem from the same thing I was thinking. I was thinking the clatter from the valve lash wacking away at the roller would cause failure of the roller tip or fulcrum bearings. The responses from people running the combo makes me comfortable enough to use them. T | ||