Aren't 68-72 chevelle body structures alot alike? I was under the impression they were, but wanted to check, because I'm planning on building the "Mike Pell Auto Body Rotisserie" for the '72.

Figger' being able to spin the body onto it's side will help when I go to scrape off all the undercoating I sprayed on when I first got it. D'oh! http://www.chevelles.com/forum/wink.gif

Thoughts?

------------------
Eric Taylor
'72 350 Malibu
www.geocities.com/eandbtaylor/ (http://www.geocities.com/eandbtaylor/)

Eric There may be some custom fitting depending on the different rear bumper arrangements. Our has a 3 inch angle bracket that we had to drill hole to match the body.
We drilled for a '68 GTO and will also match up to my '71 'velle.
http://www.mypage.onemain.com/chevl71/Rotisserie/tiltcar2.jpg
http://www.mypage.onemain.com/chevl71/Rotisserie/tiltcar3.jpg
http://www.mypage.onemain.com/chevl71/Rotisserie/tiltcar4.jpg
http://www.mypage.onemain.com/chevl71/Rotisserie/tiltcar5.jpg



------------------
Doug, Chevl71
Team Chevelle member #625
Gateway Area Chevelle Club member CM028

chevl71 homepage (http://www.chevl71.homestead.com/chevl71homepage.html)