72SSL48RAG
Feb 7th, 01, 4:33 PM
Hi...any ideas how to fix the following:
1)Front door window is not aligning properly when rolled all the way up...it also doesnt go all they way down (about a half inch shows)
2)Door when closed will not close all the way
(doesnt look like it is catching). Slam it hard and it closes properly....
Thanks for any help.
red2rider
Feb 7th, 01, 5:46 PM
Well beleive it or not your being vague here. Is there new weatherstripping just put on the car? Theres window stops inside the door frame that need to be adjusted for all the way down position, and all the way up position. The top innder L shaped brackets limit window up position. And can even be adjusted to permit the correct window slanting. For instance so the door window meets evenly with the back window. Take your door panel off and roll the window up and down and you'll see these adjustment L shaped brackets. Adjust accordingly with a 7/16 or 1/2 inch wrench. I forget which one. And ther you'll get the fix.. Good luck. Randy B...
red2rider
Feb 7th, 01, 5:49 PM
Also roll your window down and adjust your door closing problem first by adjusting the striker on the body or aligning the door. Do this before you start on the window problem..
72SSL48RAG
Feb 7th, 01, 7:25 PM
Wow...thanks for the quick reply.
I will give it a try.
Thanks again.