does anyone know if there is a company that makes floorpan for a 1970 chevelle that goes all the way up too the back seat.perfer the 3 piece design. thanks

I don't think they come all the way up over the hump to the back seat. Try Jim Dryer Chev. parts. I just picked up a 3-piece truck pan for my '66 yesterday from him. He can tell you what is available as well as the other parts suppliers listed here. You can probably add some sheet metal to the 3-piece and take care of your problem.

Good luck

The sheet metal from the front of the trunk floor pans over the rear axle and down behind the back seat to the rear seat floor pans is not re-produced by anyone. I just went through this with my '70. I had to get one from a donor car at a junk yard.

Eric (Sevt Chevelle) directed me to Sundell's. They have a yard here in PA and one in North Carolina (father and son). Norm (the Dad, here in PA) is a great guy. Very Helpful. They claim to have over 400 cars between the 2 locations. You might try them. Norm's number is (724)794-6827. His son Eric in North Carolina is (704)434-6759.

Hope that helps and good luck!

Andy