I am sorry if this question has been asked before, but i did a search and didn't come up with anything.

The two sheet metal body mount towers located beside the rear fenderwells are severely rotted out. Surprisingly, the actual floor is absolutely fine, just the two towers themselves are wasted. Are reproductions available? or am i looking at doing some hand fabrication?

ARE YOU TALKING ABOUT (OOPS) under the fire wall? you could cut them off a donor car?

------------------
I couldn't repair my brakes, so I made my horn louder.
Just let me apolagize for my spelling right now!
www.EINSTYN.com (http://www.EINSTYN.com) TC Gold#1460, VCEA#2, SCPC#44
68-72 Wagon resto & mod info, parts & sales.

Oops here as well, i guess i should say that they are for a '64 Beaumont (Chevelle) as well, and they are the sheet metal body mount towers next to the rear wheelwells under the front of the trunk floor...

Are these available at all for any year chevelle? There are no donor cars at all in my area...

This is the last item before we mount the body back on the frame! I'm getting excited!



[This message has been edited by koso_64 (edited 10-23-2002).]

Repro's are not avaible for that. You will need to cut them off a donor car and weld them on yours. You might even try looking for a Buick, Olds or Pontiac, 64-67 as those frames are all the same so the tower would be the same also...Eric

------------------
1970 chevelle
1970 chevelle SS455 not a typo its a buick baby
1949 and 1972 chevy trucks
http://briefcase.yahoo.com/bc/sevt_chevelles

Try RPM in Saskatoon I believe they have what you want I just bot a set for my 66 112.00 each cdn trunk floor repair panel withthe body mount already attatched .....if your floor solid they have the body mounts only

[This message has been edited by CDN SS (edited 10-23-2002).]

or keep searching some one can cut those off and ship them.

thanks for the tips guys...

CDN SS: is this who you are talking about?
RPM
1920 Alberta Ave, Saskatoon
652-6668

Also, for any BC residents, i have heard that there is a chevelle wrecking yard on Vancouver Island? anybody know of this place?

<BLOCKQUOTE>quote:</font><HR>Originally posted by koso_64:
thanks for the tips guys...

CDN SS: is this who you are talking about?
RPM
1920 Alberta Ave, Saskatoon
652-6668

Also, for any BC residents, i have heard that there is a chevelle wrecking yard on Vancouver Island? anybody know of this place?

<HR></BLOCKQUOTE>

Yes that is the place .the panels are a small section of trunk floor with body mount included ... I too have heard of this place contact Pennisula Restorations for more info i think he knows the guy

That sounds like what you need, generally they come with the trunk floor kit, but if you don't need all of it, it would be a waste of money.

------------------
Leo Paugh
Maryland Chevelle Club #017
A.C.E.S.#3731
progress has little to do with speed, but lots to do with direction.
Maryland Chevelle Club (http://www.chevelles.net/mcc/mcc.htm)

Go to our sponser Ground Up and look under the sheetmetal heading.Go to the 10th page and look at the braces.Is this what you're talking about?
TRUNK FLOOR FRAME BRACE 64-67 CHEVELLE (SPECIFY LEFT/RIGHT) EA.
Code: RBB-647
Price: $45.00





------------------
John 67ss
ACES #2887
Team Chevelle Gold #127
www.mylegacyforlife.net/67ss (http://www.mylegacyforlife.net/67ss)