My engine:
355 cu:in
Edelbrock 64cc RPM aluheads
Edelbrock RPM intake
roller rockers 1:6
750 holley
MSD 6
10:96 forged pistons(10:96 with 64cc chambers)
The engine is totally blueprinted and balanced.
Nos cheater(150hp)
Built TH350(600hp) with 3000 conv.
Ford 9" 4:10 gear.

STREET DRIVEN (Night time :-) )

Now the cam: Crane Hyd spec.110551.
Lift@cam=320/320,lift@Valve=480/480,Adv.dura=284/284 a 1:5 ratio.


Any suggestions ?

Should run hard with good 7 dollar a gallon gas!

Jason it's acctually 5.80$ a gallon here.......!

Jason it's acctually 5.80$ a gallon here.......!
Dang, thats a decent price considering! Is this a street /strip car ,whats it going in ?

Swede,

Try this one:

http://www.cranecams.com/?show=browseParts&lvl=2&prt=5&Vehicle_Type=Auto&Cylinders=8&Engine_Make=CHEVROLET&Year=1977&Engine_Size=262-400%20C.I.&partNumber=113541&partType=camshaft

Or this one:

http://www.cranecams.com/?show=browseParts&lvl=2&prt=5&Vehicle_Type=Auto&Cylinders=8&Engine_Make=CHEVROLET&Year=1977&Engine_Size=262-400%20C.I.&partNumber=113532&partType=camshaft

:D