i'm ready to put my side glass back in.i want to clean the old dried up grease off the regulator and put fresh grease back on.what type do i use?gary

I would think that White Lithiumum grease. Maybe

Be careful with the white lithium grease. I was doing the doors on my vette and sprayed it on the tracks,then I jumped out the power window motor to go up and down with it, got a spark and before I knew the inside of my door was on fire.

Their is a better grease to use its like a paste form grease and works great. I will find out what it is this weekend better than the lithium grease.

thanks for ideas, will look for the paste type.sounds like the better way to go.gary

What you need is multi purpose lithium grease, I couldn't find it in tub form so i used grease gun cartridges and cut the end open. Any auto parts store should have it.

mxracr,
i own a 66 chevelle i want to redo my windows, vents seals any pointers on how to remove the glass?

Lubrimatic makes a white lithium grease in a squeeze out tube. I'm not sure where it is sold, i always buy it from Equalizer. They are an auto glass store. It's only 6 bucks a tube and the stuff is great! The part number is WLG252 on their website.

www.equalizer.com

Lubriplate white grease is the grease you want to use in this area.

thanks guys i found it a napa in a squeeze tube.gary

Use laquer thinner to clean the old gum (lube) out of the tracks, then white lube.