LMacdonald
Mar 23rd, 01, 8:43 PM
I have looked through the assembly manual for my 66 Malibu. There is no information on the window tracks and how to install and adjust them.
I assume the windows were installed by Fisher before the body was sent to the factory.
Is there another source for manuals for assembly done by Fisher?
------------------
Larry
TC # 1000
66 Malibu - under transformation
Off the Frame (http://www.chevelles.com/showroom/lmacdonald1.jpg)
Back on the Frame (http://www.chevelles.com/showroom/macdonald2.jpg)
BLURAT
Mar 24th, 01, 2:48 AM
The other source is the Fisher Body Manual for the 1966 Chevrolet line...a manual unto itself...Shawn
------------------
66 MYSTERY CHEVELLE
Mar 24th, 01, 10:52 AM
Yes, as Shawn has said, you need the BODY BY FISHER Manual...it's a navy blue colored manual...see them all the time on E=bay and at Swap meets...about $16.00 used. It will have exactly what you are looking for.
Good luck
Mike
------------------
MY 66 SS.COM (http://hometown.aol.com/mysterychevelle/66CHEVELLESS.html)
ACES # 1493
TEAM # 751
Chevelle-abration Plus Video now available!
rusty66
Mar 24th, 01, 11:11 AM
Larry. You might consider buying a CD from Detroit Irion through the Team Chevelle store for $ 39. Contains both Fisher Body Manual as well.
For my own reference I have made a picture of the old bolt positions before disassembly http://www.si.hhs.nl/~rob/images/html_album/page_01.htm This might give you some idea.
------------------
www.si.hhs.nl/~rob (http://www.si.hhs.nl/~rob)
LMacdonald
Mar 24th, 01, 1:26 PM
Thanks guys.
I am going to Super Chevy tomorrow so may be they have one there.
I did take pictures as I disassembled and I re-assembled the windows before storing them.
I think the tuff part is going to be putting them back in the right order. I am sure there is only one sequence out of a possible 100 or more.
Then after installation it looks tricky to adjust the windows so they work correctly. There are so many adjustment screws.
Rust66 great pictures I book marked your site and I will go back and have a close look.
I am building a wbe site as I go as well.
http://members.home.net/larrymacdonald2/
------------------
Larry
TC # 1000
66 Malibu - under transformation
Off the Frame (http://www.chevelles.com/showroom/lmacdonald1.jpg)
Back on the Frame (http://www.chevelles.com/showroom/macdonald2.jpg)