Ok,I finally got everything I need to put my door panels together on my '70.Thanks for the top rails,ABDYBILL.Anyone have any last minute do's and don'ts on doing this job.I'm assuming I should pop rivet the panels to the rails and then just glue the very ends of the vinyl,where it wraps around underneath.Any input would be appreciated.

Ok,I finally got everything I need to put my door panels together on my '70.Thanks for the top rails,ABDYBILL.Anyone have any last minute do's and don'ts on doing this job.I'm assuming I should pop rivet the panels to the rails and then just glue the very ends of the vinyl,where it wraps around underneath.Any input would be appreciated.
thank you for your business. I have knot done this in a long time but i can tell you a few thing i recall.
clean those rails up real good remove the window felts.
next pop rivet the cardboard to the metal try to line them up at the original lines were the old ones were.
next glue the foam to the metal knot the vinyl.then pull the vinyl over the foam and attach with staples or pop rivets.
this is how i did it but someone might have some better tips on doing this.thanks again Bill