Looking for pics of a roll around cart to bolt the body to. Body shop says they have to have away to move the body around since I got it off the frame. Any help with pics on how to build a easy set would be appreciated?
Steve

Steve, I built one but don't have any pictures. You basically make a square tubing "square" that will bolt to the frame mounts on the body. Grab to two at the firewall and I used the two in front of the rear wheels. A flat square won't bolt up because of floor pan contours so I welded on 2" stands that had flat tabs to bolt to the body. Welded castors on the bottom side of the square. Hope this helps a bit.
Roger