can someone send me a pic of how the knee knocker tach should be mounted? Are the holes there,or do they need to be drilled? Thanks,
Jerry

holes are there if dash originaly came with a KK tack, just to the left of the ashtray, Otherwise you need to fine someone with a template. Saw a post not to long ago with that information. Do a search try "Kneeknocker" or "template" or "kneeknocker template". Two holes, one for the screw and one for the base with the wires. Good luck

I have a template, but didn't have much luck sending it digitally last time.

I will say, that the hole diameter they show in the assembly manual is really larger than it needs to be. If you drill the hole just SLIGHTLY larger than the diameter of the piece on the tack, it makes for a more secure fit.

Thanks, I didn't even think of checking the assembly manual.