|
: Will a dash from a 66 fit a 67? sgaylord Sep 13th, 02, 8:40 AM Will a dash from a 66 fist a 67? I need to replace mine because it is pretty rusted where it meets the lower winshield. Thanks ------------------ proud owner of a 67 SS (Rust Bucket) more ambition than brains Sep 13th, 02, 9:39 AM Upper (welded) dash is the same. Lower cluster unit (with gauges) is different due to steering column, and switch placement. Karl 1966_L78 Sep 13th, 02, 11:26 AM that said, the 67 dash should work in a 66, the switches should be able to move (only a few inches), but the larger steering column hole will look odd on the smaller 1966 column... For a beater it'd be okay... for anything semi nice... I'd say no way... Rust at the lower windshield... Yeah, the top dash should work, but the dash pads are different, so there might be some mods there to make, although, if you cars a 66, the dash pads are larger, so it should cover any mods... ------------------ "Once you go RAT, you never go back..." TC #1366 Tony The Chevelle (http://www.chevelles.com/showroom/1966_L78/ChevelleA.jpg) Dual Quad 396 (http://www.chevelles.com/showroom/1966_L78/ChevelleC.jpg) Side View (http://www.chevelles.com/showroom/1966_L78/ChevelleD.jpg) [This message has been edited by 1966_L78 (edited 09-13-2002).] | ||