can anybody out there tell me how to wire up an electric chokeon a holley 600cfm i just put it on a 350 and would like to use it thank you jim

got 2 wires, run the - right to the carb stud and the + one, i just slapped it on my coil (positive side naturally).. its not a full 12 volts when the engine is running but it does the job. you can then loosen up the 3 or so screws on the black plastic body of the thing and then adjest your choke. dont forget to check the little screw that adjusts idle when the choke is on so it works good. hope you caught my drift there.