|
Adam Loose Mar 12th, 06, 8:31 PM I have a friend that wants to sell his heads.They are the GM aluminum 502/502 heads.Ported by Bartons race shop,larger valves,springs to match the .600 lift cam,GM roller rockers.Ran high 10's on pump gas in a 3200ish 71 nova.Probably less than 500 street miles and under 25 passes.He only wants to sell because he is going to AFR's. mb69ss Mar 12th, 06, 9:07 PM Does he have any flow numbers? If he's going to afr's because of the better flow numbers i would have to say even with the port work done maybe $2000. Adam Loose Mar 12th, 06, 9:14 PM Nah,I don't think they're worth $2k,they only cost $890/new from scoggin-dickey.I figured since they are used but have the above mentioned work done somewhere around $750?Just trying to get ideas for the swapmeet. knudsonm Mar 12th, 06, 10:54 PM You'll get over $2k on Ebay bigjimzlll Mar 12th, 06, 11:01 PM that 890 from Scoggin-dickey is for one head Adam Loose Mar 13th, 06, 2:30 AM that 890 from Scoggin-dickey is for one head I just thought it was per pair..........my mistake. ZZ69chevelle Mar 13th, 06, 2:55 AM Ray Barton doesn't work cheap either. RAT454 Mar 13th, 06, 6:06 AM Here's a set that just sold on EBAY http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8043748492&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1 69-CHVL Mar 13th, 06, 6:59 AM most ZZ heads heads used go for 1000-1100 on ebay. The porting may or may not increase the value. | ||