I have a 70' and would like to make my own tie rod sleeves. Just like these:

http://www.thepartsbin.com/sitemap/edelbrock~tie_rod_adjusting_sleeve~parts.html

I have access to a lathe and would be quite simple to make. I am asuming that you will need both a LH and RH tap.

Anyone know the thread size?

Thanks,
Matt

in the link it says .625, don't know the threads per inch.


david

It's 5/8-18. You will use RH and LH taps and jam nuts.

Mike

Thanks for the quick responses.

-Matt