Any recommendations on a Aluminum Radiator that fits well in a 65. I want to use the factory fan shroud and will be running a mid small block, 700r4 trans with A/C. Thanks for any suggestions.

Any recommendations on a Aluminum Radiator that fits well in a 65. I want to use the factory fan shroud and will be running a mid small block, 700r4 trans with A/C. Thanks for any suggestions.

Keep in mind for a better flow pattern if your 65 has inlets stacked on the passenger side this was a poor design and maybe the reason things changed in 66/67 ... you can use the 66/67 version .. so the driver side on the core is not stagnet at low speeds .. the 66/67 rad will bolt up the same but you will have to use the 66/67 hose and stat housing
we also made the fan shroud mounting brackets so you may use the plastic b/b fan shroud with a minor mod to where the inlet is located ... for better cooling with mechanical fan .

heres more in fo on this link

https://secure.wf-api.com/www.chevellecooling.com/52.html?psid=aMZiIDm.pcKk6nEX5M8d&sm=14001

Don

Thanks Don, Had not thought about the inlets being on the same side. I'm glad I posted this question. Thanks a Million, -Kenneth