1Quik7D
Aug 10th, 02, 11:15 PM
Just got a new hood and am wondering if I should strip to bare metal or just DA and prime. The hood came from Goodmark in black primer/paint. Any suggestions? TIA
|
70isfine Aug 11th, 02, 10:43 AM I would DA it and then prime it.No need to remove the E coat. IGOTTA71 Aug 11th, 02, 11:49 AM We sell and install those hoods all the time, I would just scuff ad prime as normal. ------------------ Jason Babal 69 Chevelle SS 3100lbs. W/O driver The launch (http://www.chevelles.com/showroom/igotta71launch10.jpg) Pro Auto Specialties (http://www.proautoclassics.com) WayneK Aug 12th, 02, 11:46 AM Red scotch pad on the underside and edges and scuff the top. ------------------ Wayne ACES# 1556 TCG # 186 sevt_chevelle Aug 12th, 02, 5:18 PM Da with 400 or 320 grit no need to remove the ecoat. Blow off the dust and wipe down the hood with wax and grease remover til clean. Prime with your 2k primer...Eric ------------------ 1970 chevelle 1970 chevelle SS455 not a typo its a buick baby 1949 and 1972 chevy trucks http://briefcase.yahoo.com/bc/sevt_chevelles | ||