1. What type of black paint is used on the rear panel for a 1967 SS?

2. How far should the black extend on the inside lip of the trunk?

Satin Black finish.

Black covers above the rear panel upper molding, under the trunk seal and to the inner trunk lip. The finish angle is ....well, that is abit harder to describe..I may have a photo of an orig. unrestored view of this if you really want to get fussy, or someone else may have the same.

Good luck

Mike

------------------
MYSTERYCHEVELLE.COM (http://hometown.aol.com/mysterychevelle/66CHEVELLESS.html)
ACES # 1493
TEAM # 751
MCC # 501
AACA # 112348

Here is a post the may help also. (http://www.chevelles.com/forum/Forum3/HTML/004310.html)

------------------
Ken<UL TYPE=SQUARE><LI>Aces # 125<LI>Team Chevelle # 586[/list]My 67 and other projects (http://www.chevelles.com/showroom/KEN67RAT1.jpg)

There were two different versions of the black out treament, one is shown nicley on page 13 of the 67 showroom brochure...this version is diffrent from the picture posted on the above link.

Mike

------------------
MYSTERYCHEVELLE.COM (http://hometown.aol.com/mysterychevelle/66CHEVELLESS.html)
ACES # 1493
TEAM # 751
MCC # 501
AACA # 112348

Thanks for the responses.....car's going to the paint shop tomorrow.