I plan to strip and coat the lower inside fender areas of my '70 with epoxy primer this weekend. I'm wondering what is best to top coat this with. Urethane paint or maybe undercoat spray? I'm also wondering what's a good way to get some type of coverage on the metal behind the re-inforcement ribbing which is also on these fenders covering part of the bottom. Seems like leaves and such could easily get trapped behind there and promote rust.

Thanks,

Jim

GO to eastwoodco.com and check out part #16003 and 16017ZP and 16008ZP ;)

i just got spraying mine with undercoating . first scuff it

That eastwood system looks pretty cool. I'm going to search through their site and see if there is something else I need. Thanks for the tips!

Jim

I cleaned mine and then poured POR 15 inside the brace area then painted the rest of the area with it :D Then I sprayed some 3m rust fighter cavity wax in there also....

graemlins/waving.gif
Rick