Does any one have the number for the PPG Orange Glow paint?

I'm at the shop and my cans are at home, but I will post it tomorow. It looks great over Radiance silver, thats whats on my car.

I used it on my racecar engine, looks great. I used the silver base under it also. Cans at the shop.

ttt

------------------
1972 chevelle-bright orange
454-Lunati solid lift cam, performer rpm intake, long tube headers, 3" exhaust with single chambler flowmasters dumped before the axle, HEI iginition, fully race ported and polished heads with 2.3", 1.88" valves,
Turbo 350 tranny- redneck valve body, shift kit, 3300 stall
10 bolt rearend- 4:11 gears, minispool, c clip eliminators
Tubular LCA's w/ solid bushings.
15x10 Cragars ss wheels
p295/50s
^^^^^^^^^^^^^^^^^^^^^^^
Currently being rebuilt from and electrical fire!
"Lets not race top-end."

Did any one ever get the code?

------------------
1972 chevelle-bright orange
454-Lunati solid lift cam, performer rpm intake, long tube headers, 3" exhaust with single chambler flowmasters dumped before the axle, HEI iginition, fully race ported and polished heads with 2.3", 1.88" valves,
Turbo 350 tranny- redneck valve body, shift kit, 3300 stall
10 bolt rearend- 4:11 gears, minispool, c clip eliminators
Tubular LCA's w/ solid bushings.
15x10 Cragars ss wheels
p295/50s
^^^^^^^^^^^^^^^^^^^^^^^
Currently being rebuilt from and electrical fire!
"Lets not race top-end."

Sorry Fast Orange, I forgot all about it, but I was standing by the paint today and had a feeling like I was forgetting something. My computer at home is broke, so thats why I have been using the one at the shop( where the paint isn't). I wrote it on my hand to remember and will post it tomorrow- promise!

<BLOCKQUOTE>quote:</font><HR>Originally posted by Fast Orange:
ttt

<HR></BLOCKQUOTE>

I don't think that's the code.. http://www.chevelles.com/forum/wink.gif

ttt-To The Top

------------------
1972 chevelle-bright orange
454-Lunati solid lift cam, performer rpm intake, long tube headers, 3" exhaust with single chambler flowmasters dumped before the axle, HEI iginition, fully race ported and polished heads with 2.3", 1.88" valves,
Turbo 350 tranny- redneck valve body, shift kit, 3300 stall
10 bolt rearend- 4:11 gears, minispool, c clip eliminators
Tubular LCA's w/ solid bushings.
15x10 Cragars ss wheels
p295/50s
^^^^^^^^^^^^^^^^^^^^^^^
Currently being rebuilt from and electrical fire!
"Lets not race top-end."

I like orange too - check my signature - Dupont Bright Tangerine.

------------------
Make it the way you like it, forget what the other guys say!
http://chevelles.com/showroom/alelcaminofront.jpg
http://www.angelfire.com/al4/alcamino64/index.html

<BLOCKQUOTE>quote:</font><HR>Originally posted by Fast Orange:
ttt-To The Top

<HR></BLOCKQUOTE>

Oh.. http://www.chevelles.com/forum/biggrin.gif
I've never seen it used before..

Now i know.. http://www.chevelles.com/forum/wink.gif TTT.. http://www.chevelles.com/forum/biggrin.gif

------------------
Shai

1972 Chevelle Malibu custom 4dr (http://72-chevelle.cjb.net)
Restoration started: February 10th 2001
TC member #1278

I got it. It's DBC61079 And I would use sterling silver under it for sure, I tried all the other bases(and wasted a lot of money) and it is by far the best look. Good luck! Jim

Thanx guys!

------------------
1972 chevelle-bright orange
454-Lunati solid lift cam, performer rpm intake, long tube headers, 3" exhaust with single chambler flowmasters dumped before the axle, HEI iginition, fully race ported and polished heads with 2.3", 1.88" valves,
Turbo 350 tranny- redneck valve body, shift kit, 3300 stall
10 bolt rearend- 4:11 gears, minispool, c clip eliminators
Tubular LCA's w/ solid bushings.
15x10 Cragars ss wheels
p295/50s
^^^^^^^^^^^^^^^^^^^^^^^
Currently being rebuilt from and electrical fire!
"Lets not race top-end."

USMUSL,
do you have any pictures of your car?
Thanks

Yes, but they are on my computer at home. I'll take some soon and post them.

that would be great as I am thinking about painting my car orange as well.
Thanks