I need to replace the trunk seal gutter all around and also the tranney tunnel up a few inches above where firewall and the tunnel start ending just in front of the stick shift. I have already replaced both sides of floor pan and both kick panels. I NEED HELP

Probably gonna need a donor car for the tunnel unless you can get one fabbed up. The truck gutter you can fab up and part of it comes with the rear window valance or whatever you call that metal plate behind the rear window where the glass sits all the way back to the trunk gutter. That's about 25% of the gutter seal.

Both should be relatively easy to get fabbed up at a sheet metal shop. Someone else will resond shortly who probably already made the same repairs.

hang in there.

The trunk weatherstrip gutter is not reproduced and GoodMark has listed them (3 pcs set) as being tooled with the latest estimate of mid Feb, but they'll probably miss that date too. The rear window to trunk filler panel comes with a small portion on the corners but the rear tail panel has the complete gutter. The 3 piece set from GoodMark would be the top of the quarter panel gutter and the rear window to trunk filler panel section.

Looks like fab if you need something immediately...

Check OPGI item number: CH26474

I just ordered a set and they're out of stock.

Yep - I called them yesterday too. The person I spoke with stated they did not know where they got them from - maybe GoodMark and maybe China...

He also stated they have been on order for quite some time, they have 30 something on the waiting list and more than that in inquiries. The past delivery dates we spoke about seemed to match what I've been hearing from my GoodMark rep... The latest date was Feb 14 which, like all the other perspective dates, has come and gone

Any idea where else I can find the trunk seal gutters? Original Parts Group still can not get them, and doesn't know why they are in their catalog???? They can not get them from their vender.

How bad are the quarter panels?

They are dented and rusted in the channels.

New full panels will replace all that would it not?

Full quarter panels from GoodMark do not have them on.

It won't be to hard to use a large piece of 18ga. or 16ga sheetmetal to fab up the tunnel, just bend it over something like your leg, or what not...