I can feel the over spray on it. The guy who shares my shop with me didn't cover my frame horns and they are now kinda dull from over spray. What can I use to get this stuff off? I think it was a PPG single stage white... or a clear.

yc,
Call the powder coat guys first to make sure but .... I am pretty sure that enamel reducer, or whatever was used to thin the paint he used should work and not hurt the powder coat. But ... like I said, ask the powder coat guys first.

Get some clay bar.Works great on most surfaces.

Thanks very much guys, I'll give em a call, and then try that out.

If you use solvent you may want to rub them out afterward. Regular fine compound will work to bring the gloss back. Most solvents will dull the surfaces of powdercoat just a little.

70isfine is right, clay bar does away with overspray, but on a frame it might be difficult. If its real shiny and smooth I would give it a try.