was wondering if regular stripper will take por 15 off. thx steel

On you or the car or the floor? Not sure what you are referring too. For your car(metal) the only thing that will take por15 off after drying in abrasive materials. For yourself time and fingernails scraping. For the floor, abrasive materials again. Sand paper and die grinder. Don't think stripper will touch por15 at all.


Hope this helped.

Chemical stripper won't do much to POR if it was properly applied and has cured. POR-Strip won't even harm it, but they make a tank strip that might but I would e-mail them directly first.

The only way I can be certain is blasting or grinding with 40 Grit as I have done. BUT even that is a pain especially on a frame and slow going. Makes you apreciate how tough the stuff is!