Hey guys, i am going to be installing my .060 over 427 BBC in my chevelle real soon and wanted to know your opinions on my cooling setup. I currently have a stock 3 core brass radiator, and a stewart stage I iron water pump. This is an all steel but the intake BBC. I figure on running a 180* thermostat. For a fan i have 2 options, either a standard clutch fan, or a flex fan, both with a standard 1970 fan shroud. This car is in the central valley in california and will be driving it in the warm weather which can run anywhere from 60 up to 110 on the bad summer days. All opinions are welcome! Thanks guys!

Daniel

I would say stick with the clutch fan ... if your looking to go aluminum on the rad
check out ths link
http://www.chevellecooling.com/m3.html?form_name=ecom_ecl_product_details

and some of the post on the board about the Alumitech products .

Don