My 70 has been in primer for the last couple years and in the process of working on it, it has gotten some finger prints and small oil spots here and there. What is a SAFE way to remove greasy finger prints without damaging the primer?

Thanks in advance!

umm i would get some 150 grit sand paper and go over it until u cant see it anymore... if u want to be on the safe side use 200 or so

wax and grease remover should do the trick followed by sanding

Thanks guys! graemlins/waving.gif

Wash it with soap and water first then wipe it good with the prepsol. Do not touch it with sandpaper until its clean, you will grind the wax and oil into it, and probably cause yourself major paint problems when it comes time to topcoat.

I would not advise any type of sanding, because your actually going to sand the grease or dirt down into the primer. Wipe down with DX330 (PPG) or 900 (Diamont BASF) These will both work great.