Does anyone repop the floor brace between the inner wheel house for a 68? guess you would call it the 4th brace back from the front.

Don't know if they repo that brace for a 68. I fabricated one for my
64 convert using 18 gauge.
Rich

That's the one brace that no one makes, yet anyways.

thats what I figured,luckily i found a donor but still considering fabricating,I just dont have much left to go from

Gravy D; I have some photos of the brace I fabricated for my 64
convert. I don't know if the dimensions between the inner fenderwells
are the same for a 64 to a 68. But anyway if you want the photos PM
me with and address and i'll send them to you. They may help you.
rich

Gravy D; I have some photos of the brace I fabricated for my 64
convert. I don't know if the dimensions between the inner fenderwells
are the same for a 64 to a 68. But anyway if you want the photos PM
me with and address and i'll send them to you. They may help you.
rich

I appreciate it Rich,I'll PM you. I had deal on one all set up on one off a donor vehicle,so I had the guy email me a pic, the hdtp donor vehicle was quite different than mine, mine is not much more than just a "z" shaped pice of sheetmetal,with a little modification to each end.http://community.webshots.com/photo/193869235/522390662wWGwoJ
I have a buddy in the sheet metal biz so I can get one fabbed pretty easy I think. Thats the second time I almost got burnt on buying sheetmetal off a hdtp that doesnt fit a conv,first time was the front body mounts.