71velle
Aug 19th, 99, 6:23 AM
I need to know what size the 2 bolts are that hold the bracket on the transmision that supports the floor shift cable. I don't seem to have the right size in my bolt bin. Trans is a TH350 in a 71 malibu.
|
73Malibu Aug 19th, 99, 6:45 AM You use the same thread size that the pan bolts are, I got my bracket from the junkyard and the two bolts did have regular cap screw heads, the regular pan bolts have the large head with "washers" built in ------------------ Frank W Gen X Member#22 (MA) 73 Malibu Coupe http://hometown.aol.com/folingo/myhomepage/auto.html Mighty 305 Power 71velle Aug 19th, 99, 10:18 AM 73Malibu, that would make sense. Thanks I had a 1/4 bolt that was to small...so I tried a 5/16 bolt but it was to big. | ||