I can't access their site - I'm not sure if its my computer or not. Can somebody check, and give me the link?

I had the same problem looking to buy a set of scorpion rockers. Wound up going elsewhere.

Why not call them?

(920) 233-2023

They are still in business, their phone number is 1-800-233-0199.
Their website in under construction, that's why you can't access it.

Mike

I have the catalogs in .pdf form if anyone wants them

Vince,

Fairly sure I have the printed catalogue at home. Will check as soon when I get home, although the PDF file is a dup of the printed cat.

PS - what parts do you need? I will assume intake valves.

Actually, I was looking for the specs on the springs on my heads - thy had it listed.

Joe, I don't plan on buying valves.

I've got one of their catalogs right here...what do you need?

We'll, since you asked...

I was wondering what height I should have these beehive springs setup at fo my 454HO. I think the stock springs were only 110# @1.88 on the seat (which sounds low for a roller don't it?). I think Comp specs out these beehives at 150# at 1.88. Wondering if thats too much. I have to tell the machinist how much to deepen the pockets.

Make sure he has the valves and the correct retainers. I would have the seats cut to a depth of 1.930 and then shim back - .030 and .010 shims are common - this gives you room to set it correct. 1.900 installed ht would get you 143 at the seat ( open = 331 for the intake . 343 for the exhaust).

Thanks Joe.