I cracked this when installing a bracket.... (I know... add it to the "Stupid Things I've Done List")

http://img52.imageshack.us/my.php?image=crack3to.jpg

Since the bracket (serpentine) uses both bolts, I probably dont need it....
Can I put sealant on the bolt and torque it lightly??

Should I try to fix it? Is it no big deal??
HELP!

I would run a little sealant on the treads and torque it lightly. If you dont seal it, you will leak oil and know.

Motor's shot. Better let me take and "recycle" the iron for scrap ;-)

I cracked this when installing a bracket.... (I know... add it to the "Stupid Things I've Done List")

http://img52.imageshack.us/my.php?image=crack3to.jpg

Since the bracket (serpentine) uses both bolts, I probably dont need it....
Can I put sealant on the bolt and torque it lightly??

Should I try to fix it? Is it no big deal??
HELP!

Under normal conditions, all you would have is a short 3/8 bolt in there, goes through to the fuel pump rod.

I would put a stud in there, Loctite the dog in and be done with it. Watch the length so it won't lock up the fuel pump rod.

thanks guys!

I feel better about it now!!

allengator,

what is that engine painted with? Is that the POR-15?


JT

hog wild on the hardener???