I’ve asked too many people what to use, now I’m confused.

The cam is for a 3500 lb budget bracket car with a 454, c/r 9.5, 3500 stall, 411’s, RPM limit about 6200.

I've had the VooDoo 60203, 60204 and the Bracket Master 00026 suggested.

Thanks for any help.

Pat,

With your converter and rear gear, the 60204 will work fine. It would make more power with a 10:1 to 10.5:1, but the 60204 makes a little more power than the old UD 288/296H10, and Mercury Marine bought about a thousand of them for their 440 Magnum engine, which only had 8.8:1. It will need a good mech fuel pump a Carter 172 gph or a similar Holley, and 1/2" #8 fuel line from tank to carb. It should be making between 465 to 500 BHP.....

UDHarold

Thanks again UDHarold, I was getting worried you wouldn't have time to answer.