I picked up a Sanborn 5hp 60 gallon (oil).
I think the compressor may need a rebuild.
Anybody know what would be a typical time to go from 0 psi to 125 in the tank.
Also recovery time from 90 psi back up to 125

TIA
Don

To go from 0-125 will take several minutes. Recovery on mine(5HP 60 gal) takes about a minute or so.

Crankshaft

Thanks Crankshaft, maybe I am ok.
It is about 1.5 min for recovery.
Sounds ike it is not totally shot.