|
: New door hinges or repair kits Harold 68 300DLX Dec 7th, 02, 5:28 PM I realize that getting new hinges is the best thing to do, but can the hinges be repaired with the kits or is it a waste of time? Thanks for your help. ------------------ Harold Gordon Team Chevelle #131 Gold ACES #403 NCOA #8797 1968 300DLX 2DR Sedan fastss396man Dec 7th, 02, 6:13 PM The kits are just fine and are easy to install. Just follow the instructions. If any painting is requires just keep the paint off of the rollers. ------------------ FastSS396Man Brian Fastss396 (http://chevelles.com/showroom/fastss396manflqtr3.jpg), Fastss396 (http://chevelles.com/showroom/fastss396manflqtr2.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manrrqtr3.jpg), Fastss396 (http://chevelles.com/showroom/fastss396manint1.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manint2.jpg),Fastss396 (http://chevelles.com/showroom/fastss396mantrunk2.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manfrchassis.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manexh.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manengine1.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manrchas1.jpg) 69' SS396 Chevelle L78 396/375hp M-21 Close Ratio Cortez Silver 10 year Resto It's brand new again! 02' Harley FatBoy, Diamond Ice Pearl and lots of chrome! ACES# 3466 Frank G Dec 7th, 02, 9:29 PM To repair them yourself all you need is a bench vise, cutoff wheel, power drill and an allen wrench. Instructions are included, very easy stuff. rb69 Dec 8th, 02, 10:43 AM where is a good source for the kits? are they available thru the dealers or NAPA? Thanks Randy sevt_chevelle Dec 8th, 02, 11:42 AM rb69, if you just need pins and bushings you can get them at NAPA or Arnold's motor supply-Iowa based store. I bought my kits from Year one because they offered the most complete kit, new pins bushings, rollers and springs. No other dealer sold the complete kit...Eric ------------------ 1970 chevelle 1970 chevelle SS455 not a typo its a BUICK BABY 1949 and 1972 chevy trucks http://briefcase.yahoo.com/bc/sevt_chevelles Frank G Dec 8th, 02, 3:44 PM I got mine from our sponsor Ground Up Restorations, www.ss396.com (http://www.ss396.com) ------------------ 1967 Chevelle SS 396 MAXX2 Dec 8th, 02, 8:20 PM We had great luck with OPG, can't say enough about how the repair kit turned out! ------------------ Team Members Forever #341 Richard, Judy, MAXX2 '69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi., Full Aluminum Bed With Full Tubs, Aluminum Firewall, Custom Aluminum Dash/Gauge Bezel. rb69 Dec 8th, 02, 8:56 PM Thanks for the input on the kits!!! | ||