If anybody is looking for a very cool metallic red, I have two pictures of a House of Kolors Cinder Red Glamor Metallic, over a pure white sealer. One is an awesome close up that is exactly the way it looks on my fire wall I just sprayed. E-mail me if you want a pic at Kierax69@msn.com .

I also just installed the full floor in my 69, from Dynacorn and the fit was perfect, using the Goodmark braces. I also have there 69 doors I haven’t pulled out of the box yet, if anybody want’s to know how they fit they will be on in a few weeks.

Tom

Oh, if somebody want's to post it that might be easier.

email them to me at turboblastperformance@charter.net
and I will post them for you, I'd like to see them!

yes yes please post, i would love to see them as well.

aaron

sent, the close up is dead on.

I've been curious ... how do you fit a full size floor pan inside the car? My 1/2 pans will barely fit, and that's with both windows down and just the right angle.

I think they look like a great answer for a convertible, but couldn't figure out how on a coupe.

Thanks, Neal

NICE!
http://pic3.picturetrail.com/VOL18/608404/1268913/72600770.jpg

http://pic3.picturetrail.com/VOL18/608404/1268913/72600795.jpg

Why is the left rocker panel NOT welded in but yet the car has been painted, seems kinda arse backwards to me??

The full floor starts at the toe board, and overlaps the rear seat tray about 4 inches. It fit right in with the door off and back window down. Plenty of room. The rear tray is not part of the full floor.

I wanted to paint the firewall while the body is off the frame. I did not want to replace the rockers while the body was not settled on the frame. The door jam area behind the front fender is not painted yet (covered in barrier paper) so I can weld the rockers then paint. As soon as the body is back on the frame the quarters are being replaced also and the rockers are also welded to the quarters. I also have a new frame that is not in the picture to the left, and wanted all major panel welding done on that frame. The quarters are in the pic are still the old color, viper red.

could not see the pics...just a couple of red "x's" in box... :(

Beautiful! What did you use for a gun?

Um.. Im not realy sure of the name. It is a gravity fed non hvlp that I bought for $75, 5 years ago.

House of Kolor is real pricy stuff.........didn't understand why until the clear went on. Stuff is REAL deep. Gotta see it in person!!

I can't say the scheme would be my choice but the paint is nice stuff. Kevin http://groups.msn.com/radicalrodsinc-com/shoebox.msnw?action=ShowPhoto&PhotoID=1

Tom , looks sweet man, You've been a busy young Airman, now havent you! graemlins/thumbsup.gif

Originally posted by dirtrocker:
House of Kolor is real pricy stuff.........didn't understand why until the clear went on. Stuff is REAL deep. Gotta see it in person!!

I can't say the scheme would be my choice but the paint is nice stuff. Kevin http://groups.msn.com/radicalrodsinc-com/shoebox.msnw?action=ShowPhoto&PhotoID=1 Actually HOK is pretty damn cheap.
http://www.hokpaint.com/scripts/depot.exe?pgm=itemdet.bbx&id=HOK+BC11-QT&custnum=WEB-CUST++&password=&sesid=1115124743 Where else can you buy quality red metallic for $120 gallon?

http://www.hokpaint.com/scripts/depot.exe?pgm=itemdet.bbx&id=HOK+BC11-QT&custnum=WEB-CUST++&password=&sesid=1115124743 $63 for a gallon of white sealer.

http://www.hokpaint.com/scripts/depot.exe?pgm=itemdet.bbx&id=HOK+UC35-GL&custnum=WEB-CUST++&password=&sesid=1115124743 $93 for a gallon of UC-35

http://www.hokpaint.com/scripts/depot.exe?pgm=itemdet.bbx&id=HOK+UFC35-GL&custnum=WEB-CUST++&password=&sesid=1115124743 $134 for a gallon of UFC-35

The stuff isn't that pricy compared to PPG or DuPont.