|
: supet t 10 strength in relation to clutch choice xllr8 Sep 26th, 99, 11:44 PM Im looking to replace the stock clutch with a dual friction centerforce but was told that this setup might ruin my tranny ? I'm also running no hop bars and an air bag behind a mild 350 maybe 330 hp at crank any ideas or suggestions tom3 Sep 27th, 99, 4:15 PM THis clutch does have some real grab, but the trans is pretty stout too. I'd say the rear end/axle might give out first. Hole shots and first to second power shifts will find the weak link in time, but it may be a long time, hopefully. tom Gene Chas Sep 27th, 99, 6:09 PM According to DZAUTO, your ST-10 is stronger than my Muncie. I run a Centerforce dual, and I wouldn't run anything else. They are slick. Run it and make sure the tranny is strong. I beefed up my driveshaft with a unit from Denny's as well. xllr8 Sep 27th, 99, 9:51 PM thanx for your replies I guess now Im thinking I might run a centerforce since the tranny was supposedly recently "prepped" | ||