chvy67/300
Jan 20th, 03, 11:19 PM
im puting on a partial 1/4 ive already put my trunk extentions in to meet the 1/4 should i weld my 1/4 or fuse it on ive used fuser a lot for smaller stuff any advice would help
|
RandyB Jan 21st, 03, 12:08 AM I've heard alot of people using the glues to fit panels on. I can't give info for long term, so I guess I'm being old fashioned and like my welding to secure things on. For me, I'd weld it. RandyB. 67chevelle 300 deluxe Black Prostreet 468 roller. www.angelfire.com/ky2/mycars (http://www.angelfire.com/ky2/mycars) flywheel Jan 21st, 03, 7:12 AM I just got done putting both 1/4's on my 72 and I welded the top edge and glued the bottom edge from door edge to the rear bumper..That's what everyone I talked to said to do.That way the glue gets in the seams and seals it against rust.Use lots of clamps and make sure the panel fits real close b4 you glue it http://www.chevelles.com/forum/biggrin.gif Rick ------------------ 66 300 Deluxe 350/330hp 72 Elcam 402SS---soon to be a roller cammed 454 70isfine Jan 21st, 03, 7:17 AM Weld the top,glue around the wheelhouse.Any seam that is visible should not be glued. chvy67/300 Jan 21st, 03, 11:54 PM thanks for the advice i i think i will weld the top cause on a long edge i'll get read through on the finish and thats a disaster thanks again john MAXX2 Jan 22nd, 03, 12:33 PM Tell us more about the glue(s) and/or adhesive(s). ------------------ Team Members Forever #341 Richard, Judy, MAXX2 '69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi., Full Aluminum Bed With Full Tubs, Aluminum Firewall, Custom Aluminum Dash/Gauge Bezel. | ||