|
littlehop Nov 6th, 02, 11:04 PM I'm in the process of removing my frame.I got all my bolts out except the two behind the rear wheels,they just turn. I tried soaking them with blaster over night and still won't come out! Need your help! -------------- Keith MCC #515 Bill Rose Nov 6th, 02, 11:31 PM I had the same problem with my 71. Once they break loose and start to spin the only thing you can do is to get a wrench on the nut which is spinning around in the cage that holds it. I drilled a 2in hole in the trunk floor (above the body mount) with a hole saw, but a wrench on it and it came right out. Then weld the circle back and grind it after the new body mount is installed...Bill ------------------ B.Rose 68-SS396 (http://www.chevelles.com/showroom/71SSBB/1968chevelle.jpg) 71-SS454 (http://www.chevelles.com/showroom/71SSBB/1971ss454.jpg) ACES #04039 chevelless502 Nov 6th, 02, 11:48 PM Yup what he said, You are in pretty good shape compared to me. I had 6 of those like that to fight with. Isnt rust great!!...NOT!! Andy ------------------ Live Life FULL Throttle!! Andy"s Ride (http://http://community.webshots.com/scripts/editPhotos.fcgi/) littlehop Nov 11th, 02, 12:16 AM Thanks Bill for your information.It worked just like you said.Now it's time to jack the body up and place it on 4X4x8 and concrete blocks.(any tricks I should know? ) Thanks Again: Keith Bill Rose Nov 11th, 02, 10:07 PM Keith,I have a couple pictures of my car body as I was taking it off the frame. Hope they come thru, if not email me and I will send them to you. ------------------ B.Rose 68-SS396 (http://www.chevelles.com/showroom/71SSBB/1968chevelle.jpg) 71-SS454 (http://www.chevelles.com/showroom/71SSBB/1971ss454.jpg) ACES #04039 [This message has been edited by 71SSBB (edited 11-11-2002).] | ||