70ss396_kid
Jan 14th, 01, 8:04 PM
I am restoring the front end of my chevelle and I need to know what color should the fenderwells, frame, core-support etc. be?
I have access to a paint mixing booth, and can mix any color. A paint code would be enough, but any that is available pre mixed or in spray can form would be good as well.
THANK YOU,THANK YOU, THANK YOU for your help
------------------
Real 70 SS 396.
richr
Jan 16th, 01, 5:45 AM
I did Core support and fender wells with Eastwoods Under hood black. It was an excat match to the original. I used spray cans, came out excellent.
On my chasis I used Eastwoods Chassis epoxy -came out very nice - you can see it all on my web page.
Rich
------------------
70 SS - L34
Member # 442
www.chevelles.com/showroom/richr1 (http://www.chevelles.com/showroom/richr1)
http://www.my70ss.com
JodySirmans
Jan 17th, 01, 6:02 AM
Frame Eastwoods original chassis black - great. Correless primer.
firewall, inner fenders - PPG DP 90 50% of time.. Rustoleam 7777 Satin Black 50% of time. Both work well. You can buy qts of the 7777 to spray as well.
------------------
Jody Sirmans
71 SS454
ACES
Hot66ss
Jan 17th, 01, 9:20 PM
I use Krylon 1613 semi flat black. IMO its cheep readily available matches almost perfect and comes in cans. I'ts what I use.
------------------
Thomas (AKA Hot66ss)
66 Super Sport (http://chevelles.com/showroom/myss.jpg) Now striped frame off Project
67 Malibu (http://chevelles.com/showroom/hot66ss4) getting there. Soon to be 396
69 El camino Beater (http://chevelles.com/showroom/hot66sselco) 350 4 speed (Daily Driver)
Aces Member 2380
Team Chevelle member #262