Been here a little while. Would like to introduce myself and the Chevelle. I purchased it in August for $500.00 and so the project begins. No rendering it is in my head. The finished car will be tutone Red on top, Black on bottom. Black leather interior with Red stitching. 454 with 4 speed. No name yet any ideas?
Frame striped acid etched and painted Chassis Black.
Floor of the car is good so cleaned, sanded acid etched primed and painted.
Rebuilt the rear end. Installed limited slip, C3 Fab adjustable control arms, UMI control arm braces, Sway bar, rear end housing bushings, brake and fuel lines.
Front end installed. New tubular upper and lower control arms, 2" dropped spindles, 13" rotors with c5 brakes, inner outer tie rods, shocks and sway bar.
Smoothed firewall in Primer
18" X 8" Chrome Boss 338 up front
20" X 10" in the rear
Next will be replace both rear quarter panels. Coming along one paycheck at a time.