Re: Convertible top bleeding and filling.
Here's how I did mine with new cylinders. I took cylinders off mounts so there is no pressure on them, just laying in back of car. ran a hose from a funnel to the fill opening on pump, filled up funnel and ran pump so cylinders would raise top, took out funnel fill line and plugged with finger while pump had cylinders lower top, funnel only full when cylinders are expanding,did this just a few times, each time making sure funnel was full and you plugged hole on way down,. Don't try to bleed system with cylinders attached, too much pressure with not enough fluid.any?'s, just email me. good luck.