Turbo 350 governor spring/weight chart / kit - Chevelle Tech

Transmission & Driveline Transmissions and Differentials

 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 3 (permalink) Old Jun 13th, 03, 8:08 PM Thread Starter
 
Join Date: Aug 2001
Location: Freedom, NH
Posts: 3
Post

My turbo 350 is shifting around 5700 1/2 shift, 5000 2/3 shift. Tranny is behind a moderate 468 with 373 gears and a b&m 3000 holeshot converter. The problem is on the street part throttle upshifts occur too high at 25mph 1/2 shift and 37 mph 2/3 shift so its dropping out of 3rd as I cruise down Main Street at 25-35 mph. I've tried two new vac. modulators adjusted them only got a couple of mph drop. It was 42 mph on the 2/3 shift. Local shops don't have the weight and spring charts. Anybody have them? Where can I buy a kit for this? Any other suggestions ? Thanks
bigmac454 is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old Jun 14th, 03, 12:31 AM
 
Join Date: Nov 2002
Posts: 1
Post

B&M Part No: 20248 Govenor weight/spring kit for turbo 350/400/700r.

Jeff
86 Camaro is offline  
post #3 of 3 (permalink) Old Jun 14th, 03, 2:32 AM
Senior Tech Team
Jake
 
Join Date: May 2002
Location: North Texas
Posts: 3,818
Post

BigMac,
Your governor doesn't have as much effect on part throttle shifts as the modulator..
Your best bet to get part throttle shifts down is to use the spring that comes with a TransGo kit to go behind the modulator valve in the trans.
This will bring the shifts down quite a bit on a TH350. Ran into this recently.
Governor is more for WOT shift points.

www.jakesperformance.com
Racing and Performance Automatics
jakeshoe is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Chevelle Tech forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address. Note, you will be sent a confirmation request to this address.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome